Vpacket Hotwire 5100 Guide de l'utilisateur télécharger pdf (Page 40)

Configuring and Managing the Card

4-10

5100-A2-GB20-00

November 1996

Firmware Upgrade

The Firmware Installation screen enables you download code into the firmware of

the CO card.

Firmware Upgrade

Parameter

Description

Channel Number User-supplied number that identifies the channel. (See

Setting I/O Base Address

in Chapter 2.)

CO Firmware Version Current firmware version.

Firmware Filename Filename containing the code to be downloaded.

Start Firmware Download Type Y(es) and press Enter to begin the download; Type

N(o) and press Enter to cancel the download.

Set Filters

The Filters screen enables you to select the filter operation of the CO card.

Filters Display (1 of 2)

Parameter

Description

Channel Number User-supplied number that identifies the channel. (See

Setting I/O Base Address

in Chapter 2.)

MAC Filter Source Address Used to filter the data sent from the CO card to the

CP card. The CO card sends only those packets to its

attached CP card that have a source MAC address that

matches one of the addresses in its filter table.

Filtering MAC source addresses provides security benefits

by keeping users separate from one another on the LAN

segment.

You can configure up to 4 addresses. Use the left and

right arrow keys to scroll through these addresses.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 58 59

Pas de commentaire

Vpacket Hotwire 5100 Guide de l'utilisateur Page 40