Vpacket 6100 SERIES Guide d'installation télécharger pdf (Page 88)

80 Acme Packet 6100 Hardware Installation and Maintenance Guide

• ESD wrist strap

• ESD saf

e location

• S

ODIMM(s)

• NIU

Card

Removing the

SODIMM(s)

The following procedure describes how to remove the SODIMM(s) from the

Acme Packet NIU card.

Prerequisites:

• Plac

e the new SODIMM(s) in an ESD-safe location.

• W

ear an ESD wrist strap or take similar equivalent actions to prevent static

damage to the NIU card or other ESD-sensitive components.

• N

ote the location of the SODIMM connectors on the NIU card.

To remove the SODIMMs:

1. Remove the NIU card as directed in the Acm

e Packet 6100 Service Manual.

2. Place the NIU card on an ESD-saf

e mat or other similar location.

3. Using both thumbs, in the upper slot press

the spring-loaded clips away

from the SODIMM to release the clips from the installed component as

shown below.

Figure 6 - 112. Releasing the Spring-Loaded Clips

4. When the spring-loaded clips are released, the SODIMM pops up and is

seated at a 25-degree angle.

Figure 6 - 113. Releasing Spring-Loaded SODIMM Clips

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 127 128

Pas de commentaire

Vpacket 6100 SERIES Guide d'installation Page 88